1. Finite dynamic analysis test and real world testing of wheel in Canada. Third party tested the Shark Wheel’s performance under friction and tested its longevity. The Shark Wheel lasted 10% longer than any wheel they have ever tested. A traditional wheel has one defined center point and wears unevenly under friction. The Shark Wheel has a constantly changing center point, and is 540 degrees (as opposed to a traditional wheel at 360 degrees) and therefore lasts longer.
2. Stress testing at UCLA school of engineering. A traditional wheel has nearly all of the stress on the bearing. The Shark Wheel disperses stresses along its six undulations evenly. Less stress is placed on the center/bearings and therefore the bearings will last longer when using the Shark Wheel.
3. Abrasion resistance testing showed a 15% wear advantage over three industry leading wheels in an apples-to-apples comparison test. The same diameter, durometer and formulation/material were used.
4. Rebound testing showed a 15% advantage in the same apples-to-apples test as stated above. Rebound translates to speed and the Shark Wheel showed a speed advantage against the same industry leading wheels.
5. Current tests are underway at San Diego State University Mechanical Engineering Department. Off-road performance has shown to be Shark Wheel’s biggest advantage.