THE SHARK WHEEL JOURNAL / WHEEL SIZE GUIDE
54mm vs. 60mm vs. 72mm:
Which Shark Wheels Are Right for Your Ride?
The right wheel size can change how your board feels. Here’s how to find the Shark Wheel setup that fits your streets, your board, and your riding style.
AT A GLANCE
A great ride begins with a setup that matches where and how you skate. A compact street board, an everyday cruiser, and a longboard all have different priorities. Wheel diameter is one of the easiest ways to narrow the choices—but it is not the only factor.
Shark Wheel offers distinct wheel families with its recognizable wave-shaped geometry: 54mm Jaws, 60mm California Roll, and 72mm DNA. Let’s look at what each size is designed to do, so you can make the choice with confidence.
01 / SMALL & RESPONSIVE
54mm Jaws: Keep It Close to the Street
If your riding centers on street sessions, parks, and quick changes of direction, start with 54mm wheels. Their smaller diameter keeps the setup relatively low and compact, with an agile feel that many street skaters prefer.
The Shark Wheel Jaws family includes different formulas and durometers, including softer 78a options and other signature models. That means two 54mm wheels can behave differently: choose your hardness based on whether you prioritize comfort on rough pavement or a firmer feel at the park.
02 / EVERYDAY VERSATILITY
60mm California Roll: Built for Cruising
For neighborhood rides, beach paths, campuses, and everyday commuting, 60mm is a practical middle ground. The California Roll’s commonly available 78a formula adds a softer ride feel, making it an appealing option for riders who encounter cracked sidewalks and imperfect pavement.
It is especially worth considering for cruiser boards and compact setups when your priority is rolling comfortably, carving through turns, and keeping the ride fun. As with any wheel upgrade, check deck clearance and truck compatibility before fitting a larger diameter.
03 / LONGER ROLLS
72mm DNA: Go Bigger for Longboarding
If your board is built for cruising longer stretches, carving, or longboard exploration, the 72mm DNA family deserves a closer look. Larger wheels cover more ground per rotation and are often selected when riders want to maintain momentum over longer distances.
Shark Wheel’s 72mm DNA options commonly use a 78a durometer, pairing a larger diameter with a softer urethane feel. A wheel this size needs adequate clearance: inspect your deck, trucks, risers, and turning radius to avoid wheel bite, especially during deep carves.
04 / HOW TO CHOOSE
Size Is Only Half the Story
Consider your terrain: smooth skatepark concrete and rough neighborhood pavement place different demands on a wheel. Your preferred durometer—its hardness rating—matters alongside diameter.
Match your board: the larger the wheel, the more important clearance becomes. Check for wheel bite while turning, and confirm whether risers or a different truck setup are necessary.
Think about your riding style: a trick-focused setup may benefit from a smaller wheel, while a cruiser or longboard can make better use of larger sizes. There is no single best diameter for everyone.
QUICK ANSWERS
Which Shark Wheel Size Should I Buy?
For street and park: start with 54mm Jaws and choose the formula that suits your terrain.
For a daily cruiser: 60mm California Roll offers a versatile starting point.
For longboards: 72mm DNA is designed for riders interested in a larger rolling wheel.
FIND YOUR WAVE
Your Board. Your Ride. Your Wheels.
Explore Shark Wheel’s skateboard and longboard collections to find the size, formula, and look that fit your next session.
SHOP SHARK WHEELS →Wheel fit and ride feel vary by deck, trucks, hardness, rider, and surface. Always check compatibility and skate within your ability and local conditions.